Replace the worn rod-ends on your S197 Mustang or GM F-Body Panhard Bar, or build your own suspension pieces with this KellTrac Rod-End Upgrade kit.
This kit is made from the highest quality components available and comes with everything you need to either replace your current 3/4-16 Rod Ends, or use for a custom DIY project.
-(2) KellTrac Spec Alloy Steel Rod-Ends - (one LH thread, one RH thread)
-(4) Custom Billet Aluminum High Offset Angle Bearing Spacers
-(2) KellTrac Aluminum Jam Nuts (one LH thread, one RH thread)
*Works with ALL applications that require a LH and
RH thread rod-end pair (adjustable), use M14 or 9/16" bolts and have
1.90" - 2.00" wide mount openings
**Can be used in applications with wider mounts than listed, just need to fill space with washers/shims
-3/4"-16 Threaded ends
-1.91" Total Mount Width
-Designed for M14 Bolts
-9/16" Bolts can be used by reaming slightly
*10.9 or higher grade bolts, torqued to 129ftlbs recommended*